Life Fitness TREADMILL T3 Uživatelský manuál stáhnout pdf (Strana 25)

5.2 PREVENTATIVE

MAINTENANCE TIPS

The Life Fitness T3 treadmill is backed by the engineering excellence and reliability of Life Fitness and is one of the

most rugged and trouble-free pieces of exercise equipment on the market today.

NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.

Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are sub-

ject to wear, as outlined below.

The following preventive maintenance tips will keep the Life Fitness treadmill operating at peak performance:

• Clean the display console and all exterior surfaces regularly with mild soap and water or a mild household cleaner.

DO NOT use paper towels, ammonia or acid based cleaners.

NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are strongly

recommended. At no time should cleaner be applied directly to any part of the equipment.

• Check operation of the Emergency Stop System once a week.

• Check the operation of the Stop key once a week.

• Inspect and vacuum the area under unit regularly.

• Vacuum around the striding belt regularly to keep debris from accumulating.

• Inspect exterior parts regularly for wear, particularly the striding belt and deck.

•

Check the position (centering) of the striding belt.

The optimum operating position of the striding belt is from .5" (12mm) to 1" (25mm) from either side of the side extru-

sion. If the striding belt travels beyond this position, see How to Adjust and Tension the Striding Belt or contact Life

Fitness Customer Support Services for proper alignment instructions, 1-800-328-9714 (USA).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Žádné komentáře

Life Fitness TREADMILL T3 Uživatelský manuál Strana 25